Garage floor repair
Garage Floor Repair in Myrtle Beach
Garage floor repair in Myrtle Beach covers peeling floor paint, failed DIY kits, cracks and pitting: we grind it all down to clean concrete, repair the slab and get it ready for a coating that stays put.
- Licensed & insured
- (843) 627-2275
- Old coatings ground off
- Cracks and pits filled
- Ready for a new floor
- Licensed & InsuredFor the work we do in South Carolina.
- Free On-Site EstimatesWe measure and price the floor in person.
- Ground, Not Just WashedEvery slab is diamond ground before coating.
- Open 24 HoursCall or send the form any time.
Garage floor repair
What Garage Floor Repair Involves
Garage floor repair brings a worn or badly coated slab back to sound, clean concrete. Old paint, peeling epoxy and sealers are ground off with diamond tooling, and cracks, chips and pitted spots are filled and ground flush.
Most repair jobs end with a new coating. A floor that peeled once will peel again if the new coating goes over the same problem, so the old layer comes off first.
In Myrtle Beach the most common thing we take off is floor paint or a kit coating that lifted where the car parks. Heat and hot tires find a weak bond quickly.
What's included
What Garage Floor Repair Covers in Myrtle Beach
Garage Epoxy Installation Myrtle Beach scopes four parts of a garage floor repair at the estimate: old coating removal, crack repair, pit and chip repair, and the new coating.
Coating Removal
Paint, peeling epoxy and sealers are ground off down to clean concrete.
Crack Repair
Cracks are opened up and filled so they don't come back through the new floor.
Pits and Spalls
Pitted, flaking and chipped spots are patched and ground flush.
Smoothing
High spots and rough patches are ground down so the new coating goes on even.
How it works
How We Repair a Garage Floor in Myrtle Beach
Garage Epoxy Installation Myrtle Beach usually does the repair and the new coating as one job, back to back.
Step 1: Look at the Floor
At the estimate we check what's on the floor, why it failed and how deep the damage goes.
Step 2: Grind It Off
Old coatings and paint come off down to clean, open concrete.
Step 3: Repair the Slab
Cracks, pits and spalls are filled and ground flush with the floor.
Step 4: Coat It
The new coating system goes on the clean, repaired slab.
Why floors fail
Why Garage Floor Coatings Peel
Garage floor coatings in Myrtle Beach usually peel for one of three reasons: a slab that was never ground, moisture in the concrete, or a coating too thin for hot tires.
Unground Concrete
Paint or kit epoxy rolled onto washed or etched concrete never gets a strong bond.
Hot Tire Pickup
Hot tires soften thin coatings and pull them up, starting where you park.
Moisture From Below
Water vapor coming up through the slab can push a coating off from underneath.
Cost
What Sets the Price of Garage Floor Repair
Repair is priced together with the new coating, by the size of the floor and the work it takes to get it clean. Thin paint grinds off faster than a thick, well-stuck coating, and deep pitting takes more patching than hairline cracks.
We price it at a free estimate, after we've seen what's on the floor and how deep the damage goes.
What moves the price
- Floor size
- Old coating thickness
- Depth of damage
- New finish
Related services
The Floor That Goes On Top
Once the slab is repaired, one of these goes down on it.
Where we work
Garage Floor Repair Across the Grand Strand
Garage Epoxy Installation Myrtle Beach repairs and coats garage floors in Myrtle Beach and in these Grand Strand towns.
Asked often
Garage Floor Repair Questions
Can you remove a peeling DIY epoxy kit?
Yes. Kit coatings are one of the most common things we grind off in Myrtle Beach garages. The kit comes off down to clean concrete, and the new coating bonds to that.
Can you coat over my old floor paint?
No. A new coating is only as strong as what it sits on, so old paint gets ground off first.
Will cracks come back through the new floor?
Cracks are filled before coating, but a crack that is still moving can show again over time. We point out any moving cracks at the estimate.
Is grinding dusty?
Grinding concrete makes dust, so our grinders run with dust collection. We ask that doors into the house stay closed while we work.
Do I need a new coating after repair?
Repair is the prep for a new coating, and most jobs end with one. Freshly ground concrete is open and stains easily if it's left bare.
Free on-site estimate
Get a Free Garage Floor Repair Estimate
Tell us what's on the floor now and the town it's in. We'll call to set up a free estimate.
- Free on-site estimate
- Licensed and insured
- Concrete ground before every coating




