Commercial floor coatings
Commercial Floor Coatings in Myrtle Beach
Commercial floor coatings in Myrtle Beach for golf cart and boat storage, shops, showrooms and service bays, with lines and zones marked in the floor and a schedule planned around your business.
- Licensed & insured
- (843) 627-2275
- Storage buildings and shops
- Lines and zones
- Schedule planned with you
- Licensed & InsuredFor the work we do in South Carolina.
- Free On-Site EstimatesWe measure and price the floor in person.
- Ground, Not Just WashedEvery slab is diamond ground before coating.
- Open 24 HoursCall or send the form any time.
Commercial floor coatings
What Is a Commercial Floor Coating?
A commercial floor coating is an epoxy system bonded to the concrete of a business: a storage building, a shop, a showroom or a service bay. It seals the slab, brightens the space and gives you a floor that sweeps and mops clean.
On the Grand Strand that often means buildings full of golf carts, boats on trailers and rental gear. Those floors take tire traffic, fuel and oil drips and sand all year, so the coating system is picked for that.
Lines and zones go in as part of the job. Parking rows, walkways and work areas can be marked in the coating instead of with tape that peels.
What's included
What Goes Into a Commercial Floor
Garage Epoxy Installation Myrtle Beach scopes every commercial floor at a site visit, and almost every job has the same four parts.
Surface Grinding
The slab is ground to remove sealer, curing compound, old coatings and grime.
Joint and Crack Repair
Control joints, cracks and chipped edges are filled so wheels roll over them cleanly.
Coating System
Base coat, any color or flake, and a topcoat chosen for the traffic the floor carries.
Lines and Zones
Parking rows, walkways and work areas marked in the coating to your layout.
How it works
How a Commercial Floor Gets Coated in Myrtle Beach
A commercial floor gets the same grinding, repair and coating as a garage, with the work planned in sections or after hours so the business keeps running.
Step 1: Site Visit
We measure, check the slab and ask about traffic, chemicals, lines and areas you can't close.
Step 2: Plan the Schedule
We agree on the order of the work and when each area goes back into use.
Step 3: Prep and Coat
Grinding and repairs, then the coating system, then lines and zones.
Step 4: Cure and Handover
We walk the floor with you and tell you when it can take carts and equipment.
Why coat it
Why Businesses Coat Their Concrete
Businesses coat their concrete because bare concrete dusts, stains and is hard to keep clean, and a commercial floor coating fixes all three.
Easier to Clean
A sealed floor mops clean, and fuel, oil and sand stay on the surface.
A Brighter Space
A light gray floor reflects the light you already have across the whole building.
Marked Rows and Lanes
Lines in the coating show where carts park and people walk, and they don't peel.
Cost
What Sets the Price of a Commercial Floor Coating
Commercial floors are priced by square foot. The rate depends on the slab's condition, the coating system the floor needs and how much line work goes in.
We price every commercial floor after a site visit, with the scope and schedule written into the quote.
What moves the price
- Square footage
- Slab condition
- Coating system
- Lines and markings
Related services
Other Floor Coatings in Myrtle Beach
Garage Epoxy Installation Myrtle Beach also repairs worn slabs, lays flake floors and coats porches for business owners.

Garage Floor Repair
Failing coatings ground off and the slab repaired before recoating.
- Paint removal
- Crack repair


Where we work
Commercial Floor Coatings Across the Grand Strand
Garage Epoxy Installation Myrtle Beach coats commercial floors in Myrtle Beach and in these Grand Strand towns.
Asked often
Commercial Floor Coating Questions
Can you coat a golf cart storage building?
Yes. Golf cart and boat storage floors are a good fit for a coating with marked parking rows. We plan the coating system around the cart and trailer traffic.
Can you work around our business hours?
We plan the schedule with you at the site visit, including which areas are coated first and when each one goes back into use.
Does the whole building need to be empty?
Only the area being coated needs to be clear. Larger floors can often be done in sections so the rest of the building keeps working.
Can you add lines and zones?
Yes. Parking rows, walkways and work areas can be marked in the coating in the colors and layout you need.
Can you coat over an old floor coating?
If the old coating is sound and well bonded, sometimes. If it's peeling or worn through, we grind it off first. We decide at the site visit.
Free on-site estimate
Get a Free Commercial Floor Estimate
Tell us about the building, its size and the town it's in. We'll call to set up a site visit.
- Free on-site estimate
- Licensed and insured
- Concrete ground before every coating

